"A few years ago, I purchased the following training materials from your firm to use for qualifying Technicians to work in our Metrology Lab.

WPT1001 “Introduction to Measurement and Calibration”
WPT1002 “Precision Electrical Test, Measurement and Calibration”
WPT1003 “Precision Temperature Measurement”
WPT1005 “Precision Pressure and Vacuum Measurement”
And WPT1006 “Precision Flow Measurement.”

We used these to create a successful, in-house training program that helped us to achieve NVLAP accreditation. We’re now contemplating expanding our scope into Mass, Force/Torque, and Dimensional Metrology."
R. P. (Bob) Effler, ORNL Metrology Laboratory

"Below is an inventory of the WorkPlace training media we currently have in use at our PMEL (Precision Measurement Equipment Laboratory) located at Arnold AFB. I certainly appreciate, and was extremely impressed by, your offer to update these as a result of my contacting you in an effort to provide feedback on the CCT Exam Preparation training media.  I am extremely impressed with your dedication to customer satisfaction. Thanks in advance for your response to my feedback."
DeWayne Watson, PMEL Quality Manager, Arnold AFB, TN

"I use your courses as the core curriculum for all training. Everyone must take, test and pass before they go on to equipment specific training. Feel free to use my name for anyone who might want to know how they are being used.
Cory Peters, Exelon Power Labs

"Your Measurement Uncertainty course is a good one. We have revised several of our procedures as a result of what we have learned."
Mike Knopf, Boehringer Ingelheim Pharmecuticals

"I used your CCT Exam Prep to pass the test. I used it as my only study resource, and It totally prepared me to take the test. I am using it for our other techs to help them prepare as well.
I think your new Workplace Training software is great
“Metrology Application for Engineers and Scientists" You are the only Company "Workplace Training" that is geared directly for Metrologists and the training of Future Metrologists.
The Educational benefits gained from your Computer Based Training software coupled with the confidence level for an individual (Metrologist), adds to the overall technical abilities of any Company. Please keep going forward with your Educational Training efforts."
Thomas Weidmyer, Metrology Manager, Fairchild Controls Corp

"I picked WorkPlace Training because you have the best deal. And I don’t just mean pricewise. I mean overall technical content, the testing and convenience also."
Jennifer Smith, Southern California Edison

"We use your training as part of our Kaizen Green Belt program. We don’t want to go offsite, and your courses allow us train our experienced staff, and satisfy our auditors."
Richard Skaggs, TRW

"We put all of the Certificates of Completion on the wall. The customers love it and have commented on them."
Billie Brown, Sanmina

"As presented by Corporate Metrology Panel (CMP) has a plan to address the declining pool of workers trained in the Metrology discipline. We will populate some of the LM Metrology Workforce from disciplines with complimetary skill sets and educate and train in Metrology specific studies, processes and practices. While we are investigating how other companies expect to cope with this shortage, of immediate interest is the purchase of web based training modules from Workplace Training, Inc (see attached). If each business area purchased a couple of titles we could buy the suite, place them on The Knowledge Network for use across LM, and include them in our employee’s role based training plans.These structured learning courses will supplement on the job training and document employee training completion.
It would be very difficult  (if not improbable) for the CMP subject matter experts to create such a comprehensive work as what we wish to purchase off the shelf."
Chuck Simcik, Lockheed Martin Missles and Fire Control

“We used your CCT course to get our technicians certified. They were more comfortable with it and found it to be better organized then the ASQ’s Metrology Handbook.”
Metrology Supv, Major Aerospace/Defense contractor

"I wanted to thank you for your outstanding service and cooperation in helping me the last time I was in contact with you. Unfortunately I wasn't able to complete some of the WP training I submitted for then.  I would certainly like to continue some of them more and will pass these to my coworkers who may be interested.
Don Murrow, US ARMY TSC - Rock Island

"Great safety content in Precision Electrical Measurement. Very impressed."
Leocadio Garza, Instrumentation Manager, Atlantic Scale Company Instrument Division

"Thad & Kirk,
I downloaded the updated content and completed my testing; course works as it should. This concludes my testing of the Work Place Training content. I will now pass the baton onto the LMS team that adds content to our production LMS environment.
I would like to thank you both very much for your impeccable support during the testing process. Your quick responses to issues and rapid actions with code modifications made this process both fast and painless. It has been a pleasure working with you gentlemen.
Thank you very much!"
Tom Patterson, Learning Services E Team, Lockheed Martin

"Training is very big. Labs are cross training. You can be vulnerable during an accreditation audit if you do not have adequate or back up personnel to perform calibrations".
Tom Smith, Owner, National Calibration and Testing Labs, A2LA Accreditated, Lead Auditor A2LA Accreditation Council

"If you have a weak link in your measurement system, your ISO and QS quality systems are a house of cards. The review of your dimensional course received a straight up approval by our calibration technicians".
Robert Holcomb, ASCI, A2LA Accreditation Council

"We found we could deliver training with your courseware cheaper than hiring or bringing in an instructor. The guys had fun comparing their test scores with each other. Humbling".
William Hinton, Metrology Lead, North Atlantic Energy Services, Seabrook Station

"We use your courses on the LAN. It works great. With reduced travel and training dollars,
it really helps".
Ronald Fuller, Naval Air, Lakehurst, NJ

"Thank you for sending the demo package, literature and pricing. We think this training material would be very useful for technician instrument engineers taking the UK National Vocational Qualification (NVQ) in Metrology (nationally accredited competence-based qualification)".
Prof Barry E Jones, Proj Mgr, Nat Measurement Program, Brunel University, UK

"A very inexpensive way to train lab employees. It provides the training documentation we need".
James Bowman, Quality Manager, Lockheed Martin, Oak Ridge Nat Lab

"I wanted to express my appreciation for the SI Metric for the Workplace Series. It thoroughly covers all aspects of the SI system and has proven to be a valuable tool. Thanks for your assistance".
Ralf Mosolf, Technical Training Mgr, Mercedes-Benz US

"Your prize was the finest item offered at the MSC and I'm extremely proud that I won it!. By the way, I ran into the gentleman from St. Jude Medical that you are working closely with. I told him that I was extremely impressed with the intranet training program that he an Workplace Training were developing. I can only hope to someday offer our employees a similar information and training system."
Phil Graham, Mgr. Measurement Assurance, Northrop Grumman Corp.

"Your package is the best I've seen. I've been looking for a more formal training program for my techs for a long time. Everything I've seen is either to basic or to advanced."
David Mull, Calibration Manager, L-3 Communications